Tracks and Suspension

How do snowmobiles work?

How do snowmobiles work? An engine drives a CVT belt, the belt turns a track at the rear, and two front skis steer. Here is how each part does its job.

On this page
  1. The engine
  2. The CVT: how the ratio changes
  3. From the CVT to the track
  4. Why the track works on snow
  5. Skis, steering, and body position
  6. Controls
  7. Why the engine needs snow
  8. Common myths
  9. Safety

A snowmobile’s engine drives a belt through a continuously variable transmission (CVT). The belt turns a driveshaft, which turns the rubber track at the rear. The track grips the snow and pushes the machine forward. Two skis at the front steer. The long, wide track spreads the weight, so the sled sits on top of soft snow instead of sinking into it.

The rest of this article follows that chain from the engine to the track, then covers the other parts that make the sled work.

The engine

Most snowmobiles use a two-stroke or four-stroke gasoline engine. Two-strokes were the historical norm because they are lighter, simpler, and cheaper to build. Four-strokes have become more common on newer sleds. Engine sizes vary, and many production models fall roughly in the 600 to 850 cc range. Some models are turbocharged.

The CVT: how the ratio changes

Snowmobiles do not use a gearbox that the rider shifts. Instead, a CVT connects the engine to the track through a rubber drive belt. The CVT has two pulleys, called clutches, with the belt running between them:

  • The primary clutch sits on the engine’s crankshaft.
  • The secondary clutch connects to the rest of the drivetrain.

As engine speed rises, flyweights in the primary clutch push its sheaves together. That moves the belt to a different position on each pulley, and the ratio changes smoothly. There is no gear lever or clutch pedal. The primary clutch starts to engage at a set engine speed, which varies by model. The rider works only the throttle and the brake.

From the CVT to the track

The secondary clutch drives a jackshaft, which connects to a chaincase or gearcase. From there, a driveshaft carries power to the drive sprockets. The sprockets engage the track’s inner drive lugs, and the track is pushed around to move the sled forward.

Why the track works on snow

The track is a long, wide belt that runs around the slide rails and idler wheels. Its inner drive lugs are driven by the sprockets. Its guide clips slide on hyfax strips on the rails. The track does not roll on road wheels the way a tank’s tracks do. Its long footprint and deep lugs grip the snow, and the track’s length and width spread the sled’s weight so it floats on soft snow. For how the skid and track fit together, see what is a skid on a snowmobile?

Skis, steering, and body position

Two skis at the front carry part of the weight and steer the sled. The handlebars turn the skis, and carbide runners on the skis bite into hardpack. Riders also steer with their bodies. Shifting weight and leaning into a turn helps the sled carve, especially in deep powder.

Controls

On most models, the throttle is on the right handlebar and the brake lever is on the left. The brake lever works a hydraulic disc brake that slows the track. Some sleds have reverse. Mechanical reverse uses a gear, while electronic reverse runs the engine backward in some designs.

Why the engine needs snow

Liquid-cooled engines shed heat through heat exchangers in the tunnel. The snow the track throws up cools those exchangers. Low or icy snow reduces that cooling, which is one reason sleds can overheat on bare trails. Low snow also heats the hyfax. For hyfax wear and replacement, see snowmobile hyfax: when and how to replace slide rails.

Common myths

  • “Snowmobiles have a car-style gearbox.” They use a CVT, not a gearbox.
  • “The skis do all the steering.” Body position matters too.
  • “The track rolls on road wheels like a tank.” The track rides on the slide rails and idler wheels, not road wheels.
  • “Sleds run fine on any surface.” Low, icy, or hard snow causes overheating and wears hyfax.

Safety

Never idle a snowmobile in an enclosed space. Exhaust contains carbon monoxide, which can kill.

For how the suspension controls the ride, read snowmobile shock absorbers: oil vs gas explained. For the track’s sizing, see snowmobile track length. For the overall picture, see snowmobile tracks and rear suspension explained.

The complete guide to tracks and suspension

Snowmobile Tracks and Rear Suspension Explained
Read the guide

Keep exploring

Guides from other topics

All topics →