Start here
Snowmobile Tracks and Rear Suspension Explained
How snowmobile tracks and rear suspension work together: track size, ply and studs, skid parts, shocks, sag, tension, hyfax, and replacement basics.
Sled Care and Repair
How tracks, skids and rear suspension work, plus track length, tension, sag, hyfax and replacement.
Start here
How snowmobile tracks and rear suspension work together: track size, ply and studs, skid parts, shocks, sag, tension, hyfax, and replacement basics.
1-ply vs 2-ply snowmobile tracks compared: weight, acceleration, toughness, studding limits, and how to choose the right ply for your riding.
Are snowmobile tracks universal? No. A replacement must match length, width, pitch, drive lugs, clip layout, and lug clearance. Here is a checklist.
How do snowmobiles work? An engine drives a CVT belt, the belt turns a track at the rear, and two front skis steer. Here is how each part does its job.
How to adjust snowmobile track tension: lift the rear, turn both adjusters evenly, measure against your manual, set alignment, and recheck after break-in.
How to install a snowmobile track step by step: check fit, feed the driveshaft through the loop, time the drivers, refit the skid, and set tension.
How to remove a snowmobile skid and track: tools, support, skid bolts, driveshaft and track removal, parts to inspect, reassembly, and safety.
How to set rear suspension sag on a snowmobile: measure free sag and rider sag, adjust spring preload, and tune ski pressure with a fixed reference point.
Snowmobile hyfax: how to spot wear, measure it, and replace the slide rail wear strips. Arctic Cat slides are model-specific and do not interchange.
Snowmobile shock absorbers, oil vs gas explained: why gas shocks still contain oil, how nitrogen works, emulsion vs IFP, and what needs service.
How to pick the right snowmobile track length: match the skid, measure the track, and choose by trail, crossover, deep snow, or mountain riding.
Studded snowmobile tracks and ice scratchers: how studs are installed, how to judge pre-studded tracks, and when scratchers help on hardpack and ice.
What is a skid on a snowmobile? It is the rear suspension assembly under the tunnel that guides the track, holding its shape and absorbing bumps.
When to replace a snowmobile track: check for exposed rods, deep dry rot, torn belting, worn drive lugs, and stretch, plus what lifespan depends on.
Related topics