Riding Basics

How to Back Up a Snowmobile: Reverse Technique for Beginners

Backing up depends on whether your sled has electric, mechanical or no reverse. Learn how to reverse safely, steer in reverse and move a sled without reverse.

On this page
  1. Short answer: stop, idle, engage reverse, go slowly
  2. Three reverse setups
  3. Backing up with reverse
  4. When you’re stuck in deep snow
  5. Without reverse
  6. Safety around people and pets
  7. Common misconceptions

Short answer: stop, idle, engage reverse, go slowly

Backing up is simple on a sled with reverse, but the steps matter. Come to a full stop, let the engine idle, check behind you, engage reverse, and use very light throttle. Sleds without reverse have to be moved by hand, so the method is different.

Three reverse setups

  • Electronic reverse. A button on the sled engages reverse. On many two-stroke sleds, it reverses the engine’s rotation. Names vary by brand.
  • Mechanical reverse. Many four-stroke sleds use a reverse gear in the drive case, selected with a lever.
  • No reverse. You’ll need to lift or swing the back of the sled by hand.

Check your owner’s manual to find out which system your sled uses.

Backing up with reverse

  1. Come to a full stop on level ground, if you can.
  2. Let the engine idle. Don’t select reverse while you’re moving.
  3. Look behind you. Check over your shoulder for people, pets, and obstacles. Never back up over people or pets.
  4. Engage reverse. Some sleds have an indicator light or beeper to confirm reverse, and that varies.
  5. Use very light throttle. Reverse speed is often limited on purpose, and the sled can move faster than you expect.
  6. Steer carefully. Steering works differently in reverse, and the back of the sled may swing in a direction you don’t expect. Go slowly and keep an eye on the back of the sled.
  7. Brake gently. The brake works in reverse too.
  8. Return to idle and stop fully before you select forward.

Don’t shift between reverse and forward while the sled is moving. Doing so can damage the drive system.

When you’re stuck in deep snow

Reverse can bury the track in deep snow, and more throttle usually digs the sled in deeper. If you’re stuck:

  • Turn the engine off before you try to get the sled out of the snow. Ontario’s official driver handbook gives this advice.
  • Pack the snow behind the track, if you can, to give it something to grip.
  • Avoid the urge to give it full throttle. That usually makes it worse.

For more on throttle control in deep snow, see snowmobile throttle control for beginners. For digging out, tail flips and towing, see how to get a snowmobile unstuck.

Without reverse

If your sled has no reverse, stop the engine and remove the tether first. Then take hold of the rear bumper or grab handle, lift the lighter rear end, and pull or swing the back around. Lift with your legs, not your back. Trail sleds are heavy, roughly 450 to 600 pounds dry depending on the model, so ask for help if you can.

Safety around people and pets

  • Look first, every time you back up.
  • Keep bystanders and pets clear of the sled’s path.
  • Turn the engine off and remove the tether before you lift the sled.

Common misconceptions

  • “You can shift while moving.” Doing so can damage the drive system.
  • “Reverse works like a car’s.” Throttle response and steering are different.
  • “More throttle helps when you’re stuck.” It usually digs you in deeper.
  • “Lift with your back.” Lift with your legs.

For the basics of the controls and pre-ride checks, see learning to ride a snowmobile. If you fall, see what to do if you fall off a snowmobile.

The complete guide to riding basics

Learning to Ride a Snowmobile: A Complete Beginner's Guide
Read the guide

Keep exploring

Guides from other topics

All topics →