Sled Maintenance

What kind of oil does a Polaris snowmobile take?

What oil a Polaris snowmobile takes: the VES two-stroke oil family, Patriot and high-performance engines, PS-4 four-stroke oil, and how to confirm the grade.

On this page
  1. Two-stroke or four-stroke: check first
  2. Polaris two-cycle oils
  3. Patriot and high-performance engines
  4. Four-stroke Polaris sleds
  5. Other fluids
  6. Keeping the injection tank right
  7. What not to use
  8. Safety

Most current Polaris snowmobiles are oil-injected two-strokes. They take a Polaris full synthetic two-cycle oil in a separate injection tank, not premixed with the gasoline. Older Polaris four-strokes take PS-4 four-cycle oil. Product names and grades change by model and year, so confirm the exact oil in your owner’s manual.

Two-stroke or four-stroke: check first

Check your model before you buy oil. Most current Polaris sleds are two-strokes. Some older four-stroke models, such as the FST 750 Turbo and Touring, take four-cycle oil. The manual tells you which you have.

Polaris two-cycle oils

Polaris’s two-cycle oil family includes the VES Extreme Full Synthetic 2-Cycle, the VES Full Synthetic 2-Cycle and the Blue Synthetic Blend 2-Cycle. Product names have changed over the years, so match the product to your model rather than to the name on an old container.

  • VES Full Synthetic 2-Cycle: Polaris points many modern two-strokes with variable exhaust systems to this oil.
  • Blue Synthetic Blend 2-Cycle: Polaris’s oil guidance points this oil at sleds without variable exhaust systems, fan-cooled models, and older injector or pre-mix machines.
  • VES Extreme Full Synthetic 2-Cycle: the higher-performance option, and the one Polaris calls for in Patriot engines (see below).

Patriot and high-performance engines

Polaris specifies VES Extreme Full Synthetic, or an equivalent full synthetic, for Patriot engines. That covers the 650, 850, 9R and Boost models. The requirement can change by model year, so confirm it in your manual.

Four-stroke Polaris sleds

Older four-stroke Polaris models use PS-4 four-cycle oil. Grade recommendations vary by engine, and published sources don’t always agree. Use the grade printed in your owner’s manual, not a grade from a forum post or a product page.

Other fluids

Keeping the injection tank right

  • Keep the oil tank topped up. Running it dry can air-lock the oil pump, and the pump then needs bleeding.
  • If the low-oil warning light comes on, refill the tank and confirm oil flow before you ride.
  • Some break-in procedures call for extra oil or premix in the first tank. Check your manual, since this varies.

What not to use

  • TC-W3 outboard oil. It’s formulated for water-cooled outboards, not for sled engines and cold oil injection.
  • Car motor oil. It doesn’t belong in a two-stroke oil tank.
  • Premix in an oil-injected Polaris, unless the manual says so.

Using oil that doesn’t meet the spec can cause damage that the warranty doesn’t cover. Check your warranty terms if you’re unsure.

Safety

Oil starvation can seize the engine and lock the track. If the oil light comes on, stop riding and fix the cause before you start again.

The complete guide to sled maintenance

Snowmobile Maintenance: Grease Points and Service Checklist
Read the guide

Keep exploring

Guides from other topics

All topics →