Hauling and Transport

How to Tow a Snowmobile Safely

How to tow a disabled snowmobile safely, including the right attachment points, tow gear, rider roles, and the speeds that keep both sleds under control.

On this page
  1. What “pulling a snowmobile” means
  2. Gear to carry
  3. Before you tow
  4. Attaching the disabled sled
  5. Connecting the two sleds
  6. Riding the towed sled
  7. Speed and terrain
  8. When towing is not enough
  9. Safety checklist

What “pulling a snowmobile” means

When riders search for how to pull a snowmobile, they usually mean towing a disabled sled behind a second sled on snow. This guide covers that job. For pulling a sled out of deep snow, see getting a snowmobile unstuck. If you are moving sleds on a trailer or in a truck, see the snowmobile hauling guide instead.

Gear to carry

  • A rigid tow bar is the best tool for most situations. It attaches to the disabled sled and to the tow sled’s hitch, and it keeps the sleds apart. That helps on descents, where a rope can let the towed sled run up on the tow sled.
  • A rope or tow strap can work for short, gentle tows. Use one rated well above the sled’s weight, roughly 10 to 15 ft long.
  • Spare parts and tools. Carry a spare drive belt, basic tools, and a tow strap on every ride. Many breakdowns are belt failures that can be fixed on the trail.

Before you tow

  • Check the drive belt. Removing the belt from the disabled sled is often recommended, because it reduces drag and helps protect the clutch. Advice varies by model, so check the owner’s manual.
  • Agree on hand signals with the rider on the towed sled before you move.
  • Check the tow sled’s hitch. Many trail-sled rear bumpers are not rated for towing, so confirm yours is.

Attaching the disabled sled

  • Attach the line to the ski spindles or A-arms, or to the front tow point the manufacturer provides.
  • Never attach to the handlebars or the steering column. That damages steering and gives poor control.
  • Avoid plastic ski loops and bumpers. They can snap, pull the skis inward, or tear off.

Connecting the two sleds

Attach the other end of the line to the rear bumper or hitch of the tow sled. A shock-absorbing snow bungee or a rigid tow bar smooths out jerks and keeps the sleds from colliding during stops.

Riding the towed sled

Whenever possible, put a rider on the disabled sled to steer and brake. The rider keeps tension on the line and helps prevent collisions on descents. Without a rider, keep the towed sled’s skis straight with a rigid bar.

Speed and terrain

  • Keep it slow. A walking pace up to roughly 10 to 15 mph is a sensible range. Check your owner’s manual for any stated limit.
  • Take up slack gently. Start smoothly, and stop gradually so the towed sled has time to react.
  • Pack the trail. In deep snow, pack a trail first or tow on existing tracks.
  • Avoid side hills. A towed sled can roll on a slope.
  • Watch the tow sled’s temperature. Low snow and heavy loads can overheat it.

When towing is not enough

If the track is seized or the suspension is broken, the sled may need to be lifted, or moved on a rescue sled or tub. Do not keep dragging a sled with a seized track, since that can cause more damage. If you cannot tow safely, call for help.

Safety checklist

  • Never stand between the sleds while the tow sled is in gear.
  • Keep hands, feet, and clothing clear of the line.
  • Agree on signals, check every attachment, and move slowly.
  • Wear your helmet on both sleds.

For guidance on choosing a sled that can tow well in the first place, see the towing sled guide. If the disabled sled is on a trailer rather than on the snow, the snowmobile hauling guide covers that case.

The complete guide to hauling and transport

Snowmobile Hauling: Trailers, Truck Beds and Transport Tips
Read the guide

Keep exploring

Guides from other topics

All topics →