Short answer
You can load a snowmobile without a ramp by bringing the deck close to ground level. The most common ways are backing into a snowbank, building a packed snow ramp, using a tilt-bed trailer or a fixed loading ramp at a trailhead or dealer, or using a winch. Lifting the sled by hand is generally not a safe default, because a sled can weigh 450 to 750 lb.
Back into a snowbank or ditch
If you have a truck or trailer and a snowbank, you can back up until the tailgate or deck is near the height of the snow, then drive the sled on.
- Keep the tow vehicle in park with the parking brake set when you back into a bank.
- Watch for hidden ditches under a snowbank. They can trap the vehicle.
- Go slowly, and stop if the tires start to dig in.
- Unloading works in reverse. Back up to the bank, or reverse slowly onto packed snow.
Build a packed snow ramp
You can pack snow against the tailgate in a gradual slope.
- Pack it firmly, in layers. Fresh, loose snow collapses under the track.
- Keep the slope gentle. A steep ramp is harder to climb and easier to slide off.
- Let it set, or wet and freeze it so it holds its shape.
- Check the ramp before the sled goes up. If it gives way, the sled can end up stuck or tipped.
Use a tilt-bed trailer or a fixed ramp
- Tilt-bed trailers act as their own ramp. The bed tilts down to the ground, and you drive on. Do not add a ramp to a tilt bed, because the trailer is not designed for that.
- Fixed ramps at trailheads and dealers are often the easiest option if you know where they are. Ask before you rely on one.
- Sloped sites can line up the deck with higher ground if you park the vehicle downhill. Only try this on stable ground where you have full control of the vehicle.
Winch the sled up
A winch can pull a sled up a short incline onto a trailer or deck. Use a winch rated for the sled’s weight, anchor it securely, and keep everyone well clear of the cable. Move slowly, and stop if the load shifts.
Why not lift by hand or use boards
- Lifting by hand is risky. A sled is far too heavy for most people to lift into a truck bed. If you must lift part of it, use the front bumper and the rear bumper or grab handles. Do not lift by the hood, the windshield, or the plastic skis.
- Boards and planks are not safe substitutes. They can slip, flex, or split under a sled’s weight.
- Jumping a sled onto a deck off a snowbank can damage the suspension and the truck.
Unloading without a ramp
Reverse slowly onto packed snow, or back up to a bank. Keep everyone out of the sled’s path, and control the throttle. Do not let the sled roll off the deck.
Safety checks
- Lift with your legs, or skip the lift.
- Keep the vehicle in park with the brake set, and chock the wheels.
- Clear everyone from the sled’s path before it moves.
For the full loading steps once you have a ramp, see the loading guide. If you also need to tow a disabled sled, the towing guide covers that. The snowmobile hauling guide explains the other transport methods.