Mountain and Backcountry

Side Hilling a Snowmobile: How to Traverse a Slope Safely

How to side hill a snowmobile safely: body position, steady throttle, steering with lean, practice progression, and what to do if the sled rolls.

On this page
  1. What side hilling is
  2. Why traversing is riskier than it looks
  3. Body position
  4. Steering with lean and throttle
  5. Stance and snow
  6. Build up gradually
  7. Common mistakes
  8. If the sled rolls
  9. Exiting a traverse
  10. Avalanche awareness on traverses

What side hilling is

Side hilling means traversing a slope with the sled tipped onto its uphill edge. You ride mostly on the uphill ski, with your weight on the uphill running board. It’s a basic mountain skill, and it’s also where a sled is most likely to roll.

Why traversing is riskier than it looks

A sled on a slope has less margin for error than one on flat ground. Three things make a traverse risky:

  • Rollover. A sled that tips too far downhill can roll. If it does, the rider can end up below it.
  • Avalanche triggers. A traverse cuts across the slope and can set off an avalanche. Cross one slope at a time.
  • Hidden obstacles. Rocks and stumps can sit under shallow snow on the downhill side.

Body position

  • Stand with your knees bent.
  • Put your weight on the uphill running board. On steep slopes, many riders put both feet on it. Technique varies.
  • Lean your upper body uphill, and extend your downhill arm to the downhill grip.
  • Look ahead along your line, not down the slope.

Steering with lean and throttle

Most of the work is done by body lean, not by the handlebars. Cranking the bars uphill doesn’t hold the line. Many riders countersteer slightly, turning the skis a bit downhill, to hold the edge. Fine-tune with your weight.

Keep your throttle steady and moderate:

  • Too much throttle spins the track and washes the tail downhill.
  • Too little throttle bogs the sled down.

Stance and snow

A narrow ski stance helps the sled hold its edge. Deep, soft snow is the easiest surface to traverse. Crust or ice is much harder and riskier.

Build up gradually

Learn the skill in steps:

  1. Roll the sled from side to side on flat, soft powder.
  2. Try a short traverse on a gentle slope, around 10 to 15 degrees.
  3. Move to steeper or longer traverses only after the earlier steps feel controlled.

For the same weight-shift skills used on climbs, see riding uphill.

Common mistakes

  • Leaning downhill. It rolls the sled. Lean uphill instead.
  • Sitting down. It takes away the control you need.
  • Cranking the bars uphill. Body lean does most of the work.
  • Adding speed. More speed isn’t automatically safer.

If the sled rolls

Jump off on the uphill side. Never end up below the sled, and stay clear of its path as it rolls.

Exiting a traverse

Turn downhill to leave the traverse. Let the sled settle onto both skis before you carry on.

Avalanche awareness on traverses

Check the avalanche forecast before you ride. Cross one slope at a time, with partners watching from a safe spot out of the runout. For more on terrain and rescue basics, see avalanche safety for snowmobilers. For the wider skills picture, see mountain and backcountry snowmobiling.

The complete guide to mountain and backcountry

Mountain and Backcountry Snowmobiling: Skills and Tips
Read the guide

Keep exploring

Guides from other topics

All topics →