What changes in deep snow
In deep, unpacked powder, the sled floats on the snow instead of riding on a packed surface. Grip and steering both feel different. Habits from the trail, such as steering with the bars and sitting still, often don’t work in powder and can leave you stuck.
Set up for soft snow
Deep-snow sleds typically have tracks around 154 to 175 inches with 2.5- to 3.0-inch lugs. The lugs give flotation and grip in soft snow. A narrow ski stance and a light front end help the sled float and roll.
Track length matters, but a longer track doesn’t make a sled immune to getting stuck. Position and throttle matter just as much.
Ride standing
Stand with your feet on the running boards and your knees and elbows bent. Keep your weight neutral to slightly forward. Sitting down doesn’t give you more control in deep powder. Standing lets you shift your weight to keep the sled level and on top of the snow.
Use steady throttle to stay on top
Steady momentum keeps the sled up. Speed and throttle keep it on the surface, so avoid letting off suddenly.
A little throttle lifts the skis and brings the sled up onto the snow. Let up to bring the nose back down. Make small adjustments rather than big changes.
If the track starts to spin without moving the sled forward, back off the throttle. Spinning digs a trench, and more throttle usually buries the sled deeper.
Turn by rolling the sled
In deep snow, the sled turns by rolling onto its side. Step onto the inside running board and lean into the turn. The bars play a smaller role than they do on the trail. Some riders countersteer slightly to start the roll, though technique varies.
Practice first. Roll the sled from side to side on flat, soft powder before you try a slope. Once that feels natural, move to a gentle slope.
Stop and restart without digging in
Before you stop, turn so the sled points downhill or sits level across the slope. That makes a restart easier. Stop on firm or packed snow when you can, such as an existing track.
To restart in deep snow, pack the snow in front of the skis, then give the sled light throttle.
Following a packed track
Following a packed track uses less power than breaking your own trail, so it can be an efficient way to cover ground. The trade-off is that a packed track can be harder to turn out of. Plan your exit before you commit to a line.
Mistakes that bury a sled
- Sitting down. Standing gives you more control.
- Too much throttle. Track spin digs a trench.
- Steering only with the bars. Rolling the sled works better.
- Trusting a long track. A longer track doesn’t prevent getting stuck.
Safety in powder
Deep powder can hide tree wells and holes. Tree wells around conifers can trap a fallen rider head-first, so ride with a partner in sight.
Deep powder slopes can also be avalanche terrain. Carry a transceiver, probe and shovel when you ride there, and check the forecast first. Avalanche safety for snowmobilers covers the basics.
If the sled tips on a slope, bail away from it. Never bail downhill of it.
Related guides
- Mountain and backcountry snowmobiling covers sleds, altitude, gear and group riding.
- Getting a snowmobile unstuck covers digging out and towing.
- Riding uphill covers climbing positions.
- Side hilling covers traversing a slope.