A used snowmobile can be a good buy, but the asking price is only part of the cost. Check the paperwork, the engine, the wear parts and the chassis, then take a test ride, all before you pay. Low miles don’t guarantee condition, because poor storage can do as much damage as hard riding.
Questions to ask the seller first
- Do you have service records and receipts for the top end, belt and track?
- How was the sled stored, and was the fuel treated?
- Has it been modified, especially with an aftermarket exhaust?
- Why are you selling it?
- Can I see it start from cold?
Paperwork and VIN
Match the VIN on the tunnel to the title and registration, and check that the sled isn’t reported stolen. Gauges can be replaced, so the odometer may not show true miles. Maintenance records tell you more than the odometer does.
Cold start and the engine
Ask the seller not to warm the engine first. A cold start shows hard starting and smoke. For a compression test, look for cylinders within about 10 percent of each other. Healthy readings depend on the engine. On a 2-stroke, a leak-down test shows the condition of the rings and crankshaft seals.
Many 2-strokes may need top-end work somewhere around 8,000 to 10,000 miles. 4-strokes tend to tolerate more, though this varies by model.
Clutches and belt
Check the clutch sheaves for wear, grooves and burn marks. Look at the drive belt for fraying and cracks. Clutch, track and suspension repairs can cost thousands, so a clean-looking sled may still need work.
Track, slides and idlers
Look for torn or missing lugs, delamination, broken clips and damaged studs. Check the slides (hyfax) for thickness. Spin the idler wheels by hand and listen for noisy bearings. A replacement track costs roughly $600 to $1,500 or more, so a worn track is a real part of the price.
Skis, carbides and the front end
Check the carbides and wear bars, and look for spindle play. Make sure the skis point straight. Check that the A-arms and steering rods are straight too. Bent parts can point to hard impacts, rollovers or collisions with trees or rocks.
Tunnel, bulkhead and frame
Look for dents, punctures or coolant leaks on the tunnel and heat exchangers. Check for cracks in the frame around the bulkhead, the tunnel and the suspension mounts. Check the chaincase oil and coolant too. Milky or metallic oil is a red flag.
Test ride
Ride the sled before you pay. Check reverse, brakes, steering and throttle return, and watch for heavy smoke. Make sure the throttle returns fully and that the kill switch and tether work.
Walk-away signs
- Milky or metallic chaincase oil.
- Cracks in the frame.
- Uneven compression between cylinders.
- A VIN that doesn’t match the paperwork.
- A seller who won’t let you see a cold start.
- A throttle that doesn’t return fully.
Common misconceptions
- “Low miles means good condition.” Poor storage, such as old fuel or no fogging oil, can cause damage.
- “A rebuilt engine is a red flag.” With shop receipts, it can be a plus.
- “A visual inspection is enough.” Compression testing matters on 2-strokes.
- “Any running sled is fine.” Clutch, track and suspension repairs can cost thousands.
Next steps
Used sleds carry running costs too. The cost of ownership guide covers repairs and yearly costs, and the buyer’s guide covers the other decisions to make before you buy.