Choose a snowmobile helmet that carries a recognized certification, fits your head snugly without pressure points, and has a shield or setup that resists fogging in the cold. Replace it after any significant impact. A certified helmet is designed to meet a minimum standard. It doesn’t guarantee protection in every crash, so fit and care matter as much as the label.
Certifications: what the labels mean
Look for a certification label inside the helmet. Three are common:
- DOT (FMVSS 218). This is the baseline U.S. standard for motorcycle-style helmets, and it is the minimum most riders should look for.
- ECE 22.06. This is the current European standard. It replaced ECE 22.05.
- Snell. Snell publishes its own standards, which are updated from time to time. Check which current standard a helmet is certified to.
These standards test helmets differently. Don’t assume one is always safer than another. Choose a helmet that carries a current standard you can confirm, and read the label rather than relying on a sales listing.
Local helmet rules
Some states and Canadian provinces require helmets, often ones with DOT approval. Rules for minors vary by place. Check the rules where you ride, including any rules that apply on trails you cross into from another area.
Helmet styles: full face, modular and off-road
Helmets for sled riding generally come in three styles, each with trade-offs.
- Full face. The helmet covers the whole head, with a shield over the eyes. It offers the most coverage and is a common choice for cold, harsh conditions. It can run warm, especially for riders who work hard, and it is more prone to fogging. It can also be heavier.
- Modular. This style is nearly identical to a full-face helmet, but the chin bar lifts. Riders like it for the wider view and for being able to breathe fresh air, talk and drink when stopped. Electric-shield cords can be awkward, and modular helmets can also fog.
- Off-road or snocross. There is no eye shield, so you need goggles. These helmets are lighter and give more airflow when you’re working hard. They offer a clear view and little fogging, but they expose more of your face to the elements, so goggle fit and face coverage matter more.
Some riders use more than one helmet for different weather. Helmets are a personal choice, so choose the style that matches your riding and the cold you expect.
How to measure and try on a helmet
Measure your head circumference about 1 inch above your eyebrows, around the widest part. Then use the brand’s size chart, because sizes vary between brands. Head shapes also differ. Round, intermediate oval and long oval shapes fit different heads, so fit matters more than the size number alone.
When you try on a helmet:
- The cheek pads should feel snug, with no pressure points.
- The helmet shouldn’t roll forward or back when you push on the chin bar.
- Cheek pads compress somewhat as they break in, so a new helmet can feel a little firmer at first.
A helmet that is too roomy isn’t more comfortable in the long run. It gets looser and less protective over time. Wear a thin balaclava under the helmet when you try it on if you’ll wear one while riding. Size up only if the fit still works with that layer.
Fog control
Fogging is the main cold-weather problem with helmets. Options include:
- Dual-pane shield. Two layers of plastic with a sealed air gap reduce fogging.
- Electric heated shield. These plug into the sled’s helmet or visor outlet, usually through a 12V connection. Most modern sleds have one. Check that your sled has the outlet before you buy.
- Breath box or deflector. These direct breath away from the shield.
If you use goggles, check that the goggles and shield don’t leave gaps. Gaps expose skin to frostbite. For more on cold risks, see our snowmobile gear guide.
Safety features beyond the shell
Some helmets include rotational impact systems, such as MIPS. These are optional features on some models. They aren’t a substitute for certification, fit or a good helmet.
Visibility
Hi-vis colors help other riders see you on the trail. This matters on busy trails and in low light.
When to replace a helmet
Replace a helmet after any significant impact, such as a fall from the sled, even if it looks undamaged. Impacts can weaken the protective shell and liner in ways you can’t see. Many manufacturers suggest replacing a helmet about every five years, and some give different intervals, so check your helmet’s manual.
Don’t buy a used helmet. You can’t see its impact history, so you don’t know whether it has been damaged.
Myths to avoid
- “A motorcycle helmet is always the best choice.” A motorcycle helmet without a cold-weather shield will fog. Choose one with the features you need for sled riding.
- “Snell is always safer than ECE 22.06.” The standards test helmets differently. Neither is automatically better.
- “A roomy helmet is more comfortable.” A loose helmet moves and loses protection over time.
- “If it looks fine after a crash, it’s fine.” A helmet can be compromised without visible damage.
For the other gear that goes with a helmet, see our heated grips and gloves guide and our accessories article, which covers electric shield plugs and windshields.